Register | Sign In
IBmachine Machine Find machine
Find machine
Keywords
Type
Condition
Countries

Reset
Total: 6667 | New: 4024 | Used: 2643
Name
Condition
Type
Last Update

Single conveyor plant

AABO (E. AABO ANDERSEN A/S)
System components:

Single conveyor
Tunnel pretreatment
Fresh water purification: RO system
Conveyor combined oven, type A – water drying
Primer paint system (booth + application equip ...
New
Other
16.11.2016
Open

Press tools - tool works

ŽĎAS, A.S.
individual press tools
progressive press tools
transfer press tools
tools for pressing lines
notching press tools
special tools and aids
special gauges and measuring aids
die holders, ...
New
Other
16.11.2016
Open

FRUA 450 machining centre

ŽĎAS, A.S.
5-axis machining centre with SINUMERIK 840 D computer numerical control system
workspace under the portal: width of 4 500 mm, length of 14 000 mm, height of 4 200 mm
headstock: output of 8 ...
New
Machining centres
16.11.2016
Open

SKD 40/47 D boring and turning centre

ŽĎAS, A.S.
5-axis machining centre with SINUMERIK 840 D computer numerical control system
maximum workpiece diameter of 4 700 mm
maximum turned height of 2 500 mm
max. workpiece mass of 60 tons
bui ...
New
Boring machines
16.11.2016
Open

Rolled product processing

ŽĎAS, A.S.
specialized in supplying bloomings, billet mills, section-rolling mills and used to deliver also wire rolling trains.
New
Rolling machines
16.11.2016
Open

Forming machines

ŽĎAS, A.S.
Basically, the forming machines made with the ZDAS brand are divided according to the drive system to mechanical and hydraulic presses. However, the use for flat forming from sheet metal and ...
New
Other
16.11.2016
Open

Metallurgy

ŽĎAS, A.S.
Manufacture of metallurgical components and semi-finished products belongs among the basic lines of ZDAS joint-stock company. It means especially the production and supplies of first-quality ...
New
Other
16.11.2016
Open

Forming line with Cross Wedge Rolling Machine ULS 160 RA

ŠMERAL BRNO A.S.
Forming line with
Cross Wedge Rolling Machine ULS 160 RA
New
Rolling machines
16.11.2016
Open

PNEUMATIC-HYDRAULIC DROP HAMMERS

ŠMERAL BRNO A.S.
Pneumatic-hydraulic drop hammers are used for forging mainly flat and thin forgings in one cavity by several punches (rods, communal tools, etc.), whose energy can be adjusted and programmed ...
New
Hammers
16.11.2016
Open

HYDRAULIC FITTING PRESS

ŠMERAL BRNO A.S.
The press can be produced in a four-post, welded, eventually welded and anchored design, optionally with a "C" shaped frame. The hydraulic press is designed for the rubber industry, scraping ...
New
Presses - hydraulic
16.11.2016
Open

CRANK PRESSES

ŠMERAL BRNO A.S.
Crank presses are mechanical two-point drawing presses with a nominal forming force of 2.5 MN, with frames of "O" shape (LKT) or "C" shape (LDC) with large tables and rams. Presses can be eq ...
New
Presses - mechanical
16.11.2016
Open

ECCENTRIC PRESSES

ŠMERAL BRNO A.S.
Eccentric presses are presses with adjustable ram stroke, with the "C" shaped frame and are designed for hot trimming of burrs of die forgings and also for punching, bending, or other operat ...
New
Presses - eccentric
16.11.2016
Open

TOGGLE STAMPING PRESSES

ŠMERAL BRNO A.S.
Toggle stamping presses are robust, rigid and extremely precise presses with a special guidance of the ram, with hydraulic overload protection positioned in the rod or in the press frame and ...
New
Presses - unclassified
16.11.2016
Open

TRIMMING PRESSES

ŠMERAL BRNO A.S.
Trimming presses are designed for both hot and cold trimming of burrs of die forgings, as well as for calibration operations and for cold processing of sheet (cutting operations, punching op ...
New
Presses - unclassified
16.11.2016
Open

FORGING ROLLS

ŠMERAL BRNO A.S.
Aluminium forming machine with doubled tool and with special manipulators.
Machine can be used also for steel forming of billets of smaller diameters.
New
Other
16.11.2016
Open

CROSS WEDGE ROLLING MACHINES

ŠMERAL BRNO A.S.
Cross wedge rolling machines with fixed or exchangeable working rolls used for hot production of rollings from cylindrical blocks or rods in the diameter range from 10 to 160 mm:
for subseq ...
New
Rolling machines
16.11.2016
Open

HORIZONTAL FORGING PRESSES

ŠMERAL BRNO A.S.
Horizontal forging presses are designed for hot upsetting operations from rods or blocks (one-sided flange components, special hollow forgings or valves). The presses are equipped with prima ...
New
Presses - forging
16.11.2016
Open

VERTICAL FORGING PRESSES

ŠMERAL BRNO A.S.
Vertical forging presses are used for production of precise die forgings with utilization in the automotive industry, for hot and semi-hot forging with forming forces of 10-65 MN, with high ...
New
Presses - forging
16.11.2016
Open

Multimetro

MTA SRL
Multimetro digitale professionale IP67
Ideale per impieghi in condizioni estreme
Multimetro digitale a gamma automatica a doppio involucro pressofuso.
Ampio display LCD retroilluminato ad ...
New
Other
16.11.2016
Open

Durometro

MTA SRL
Descrizione:

Dispone di un’ampia gamma di misurazione. È possibile misurare la durezza di molti materiali.
Schermo grande LCD, vengono mostrate tutte le funzioni e parametri con luce di ...
New
Other
16.11.2016
Open
Next page
Single conveyor plant
System components: Single conveyor Tunnel pretreatment Fresh water purification: RO system Conveyor combined oven, ...
Press tools - tool works
individual press tools progressive press tools transfer press tools tools for pressing lines notching press tools s ...
FRUA 450 machining centre
5-axis machining centre with SINUMERIK 840 D computer numerical control system workspace under the portal: width of 4 5 ...
SKD 40/47 D boring and turning cent ...
5-axis machining centre with SINUMERIK 840 D computer numerical control system maximum workpiece diameter of 4 700 mm ...
Rolled product processing
specialized in supplying bloomings, billet mills, section-rolling mills and used to deliver also wire rolling trains.
Forming machines
Basically, the forming machines made with the ZDAS brand are divided according to the drive system to mechanical and hyd ...
Metallurgy
Manufacture of metallurgical components and semi-finished products belongs among the basic lines of ZDAS joint-stock com ...
Forming line with Cross Wedge Rolli ...
Forming line with Cross Wedge Rolling Machine ULS 160 RA
PNEUMATIC-HYDRAULIC DROP HAMMERS
Pneumatic-hydraulic drop hammers are used for forging mainly flat and thin forgings in one cavity by several punches (ro ...
HYDRAULIC FITTING PRESS
The press can be produced in a four-post, welded, eventually welded and anchored design, optionally with a "C" shaped fr ...
CRANK PRESSES
Crank presses are mechanical two-point drawing presses with a nominal forming force of 2.5 MN, with frames of "O" shape ...
ECCENTRIC PRESSES
Eccentric presses are presses with adjustable ram stroke, with the "C" shaped frame and are designed for hot trimming of ...
TOGGLE STAMPING PRESSES
Toggle stamping presses are robust, rigid and extremely precise presses with a special guidance of the ram, with hydraul ...
TRIMMING PRESSES
Trimming presses are designed for both hot and cold trimming of burrs of die forgings, as well as for calibration operat ...
FORGING ROLLS
Aluminium forming machine with doubled tool and with special manipulators. Machine can be used also for steel forming o ...
CROSS WEDGE ROLLING MACHINES
Cross wedge rolling machines with fixed or exchangeable working rolls used for hot production of rollings from cylindric ...
HORIZONTAL FORGING PRESSES
Horizontal forging presses are designed for hot upsetting operations from rods or blocks (one-sided flange components, s ...
VERTICAL FORGING PRESSES
Vertical forging presses are used for production of precise die forgings with utilization in the automotive industry, fo ...
Multimetro
Multimetro digitale professionale IP67 Ideale per impieghi in condizioni estreme Multimetro digitale a gamma automatic ...
Durometro
Descrizione: Dispone di un’ampia gamma di misurazione. È possibile misurare la durezza di molti materiali. Schermo g ...


IBmachine is an international platform for new and used machine tools trading. Easily post your own machine or quickly find a desired one.