|
Machine
Last Update: Jun 25, 2022
|
Name
|
Frequently asked question from clients who acquire wood pelletizer machine
|
|
Status
|
New
|
|
Type
|
Presses - unclassified
|
|
Url
|
https://ibmachine.com/machine/view/8450
|
|
Price
|
unknown
|
|
Description
|
( 1) How to make the mold life longer?
With the constant introduction of timber pelletizer maker right into the marketplace, the advancement of mechanical devices is additionally continuously altering. The deterioration of the mold during the manufacturing of wood pellets is additionally a major cost. So, exactly how to maintain it straight affects the service life of the wood pellet making device. For that reason, it also directly impacts the handling price of timber pellets. Just how to make the mold and mildew life of the wood pelletizer machine machine longer? Obtain your solution today!
① Consistently clean oil as well as fill
If the wood pelletizer device is not utilized for a month, it is advised to clean the oil inside, so the oil will slowly harden during long-lasting storage, which will certainly make it challenging to eliminate the following time it is made use of, which will seriously affect the subsequent use of the mold and mildew of wood pelletizer maker.
After the pellets are refined, it is needed to utilize oil to grind for a amount of time to guarantee that all the oil remains in the die opening, which is of terrific advantage to the work the next day and is additionally for the long-term use of the die. The oil can be blended with waste engine oil as well as wood chips. It can be made once and also can be reused.
② No need to cleanse the mold for a very long time
If the mold and mildew and squeeze rollers are no more utilized for a very long time, it is recommended to eliminate the mold after cleansing as well as storage space. The master cleanses the sawdust pellets inside the mould and sticks to the mould surface. In this way, on the one hand, we can protect against the enterprise from being tough to eliminate the pellets because of the solidifying of the pellets as a result of the long-lasting storage space of the pupils. On the other hand, because the sawdust has water absorption, if the sawdust externally is not eliminated, it might speed up the growth of the corrosion of the mold surface.
③ The mold need to be saved in a completely dry and aerated place
A lot of the molds of the timber pelletizer maker are made from alloy steel. If they are in a moist place for a long time, the surface of the mold and mildew may be harmed because of air deterioration, thus greatly lowering its service life.
④ The dealing with procedure should beware
The mold of the wood pelletizer machine is a high-precision part, as well as the mold opening is very carefully processed according to the compression ratio of the mold and mildew. If you are careless during the managing procedure, the structure of the inner wall of the mold and mildew hole is damaged, which may lead to molding during processing. reduced price and also brief life span.
The above are the suggestions on how to make the mold and mildew life longer for timber pelletizer maker Adhere to these 5 techniques to keep the mold and mildew, and also I think your mold and mildew will last much longer.
( 2) Why do the pellets generated by the timber pellets device have a bad look?
Why do the pellets produced by the timber pellet mill equipment look bad? Today we will find out why. During the production of timber pellet gas by the timber pellet production maker, there will certainly be a scenario where the pellets have powder and have a harsh surface. Right now, it is additionally required to check the tools information setups of the timber pelletizer maker. Besides, what is the reason for this sensation?
Wood pellets create more wood pellet powders, this feedstock can be brought on by low wetness content, the moisture material of wood pellet equipment feed is usually between 12% as well as ~ 15%. After changing the moisture content of the raw product, the problem still exists, that is, the pressure roller die is seriously used. When the internal surface of the ring die of the wood pelletizer equipment is seriously put on or the fragment size requires to be transformed, it needs to be changed. The surface area of the sawdust pellets is harsh, which may be brought on by the excessive wetness material of the raw material, or the preliminary use the mold. This trouble can be fixed by readjusting the wetness material of the raw product, or by repetitively grinding the mold with the product.
To sum up, the reasons the pellets created by the timber pelletizing device are not good in look are stated today. I hope it will certainly assist you when you utilize the wood pellet equipment once again. Over the years, Richi Equipment has focused on the research and development and manufacturing of timber pelletizer maker machines, biomass pellet devices, sawdust pellet equipments, gas pellet makers, timber processing tools, drying out devices, cooling down equipment and also packaging tools.
( 3) Advised timber pellet machine.
There are several timber pellet mill machine on the market. Today, Richi Equipment will certainly suggest some of them:
① The initial sort of little timber pelletizer maker
It is a brand-new kind of biomass energy machinery individually created by our firm's technological personnel and has independent intellectual property rights. The wood pelletizer maker is simple in framework, very easy to run, secure in operation, and can function continually. Journalism pellets have the advantages of high density, high combustion value, reduced wetness and also low ash material. The timber pellet equipment equipment transmission adopts high-precision equipment transmission, four collections of equipments are connected, and the hydraulic oil delivery system can automatically flow oil between the gearbox as well as the main shaft bearing. The life span of the primary shaft and also gearbox gears.
The functioning parts of the wood pelletizer maker die plate, pressure roller) are constructed from alloy steel, and the hardness after warm therapy can get to greater than 50, which guarantees the constant procedure of the device and also extends the life span of the whole timber pelletizer device The electronic control system of the major engine adopts the international common arrangement of star-delta starting, and also the procedure is incredibly steady.
② The 2nd kind of tiny wood pelletizer maker.
Primarily ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds as well as other plant stalks as well as manufacturing facility wastes. It is suitable for low temperature granulation of biological bacterial plant food, organic fertilizer and also compound plant food.
Features of this wood pelletizer device:
① The stress rollers are evenly distributed, and the procedure is stable. At the same time, the pressing location is raised, and also the production effectiveness is enhanced.
② The screw facility pressure controling framework is adopted, as well as the timber pelletizer maker mold and mildew void can be huge or little, which is suitable for different materials to make sure the pressing impact.
③ This version is equipped with Φ6-Φ10mm size mold and mildews, which appropriate for granulation of various materials and accomplish the best advantage.
|
Company
Last Update: Jun 25, 2022
|
|
