|
Machine
Last Update: Nov 18, 2016
|
Name
|
CNC LATHE EVC160100S
|
|
Status
|
New
|
|
Type
|
Lathes - CN/CNC
|
|
Url
|
https://ibmachine.com/machine/view/5599
|
|
Price
|
0
|
|
Description
|
1.Stanina: rotary machine table is a square cast structure, absorbing vibration; circularly arranged ribs provide rigidity optimized design high frame power, good stiffness and good impact resistance. The bed is equipped with a chip conveyor chain type. There is a support and guide bearing.
2. Table: is the round table ring shape. Clamping is performed manually 4-jaw chuck. The surface of the table has a T-shaped groove for mounting and securing the workpiece.
3. The main drive: the main drive of the table is the main engine, two-speed gearbox, pulley, small gear and one element of rotation of the drive system. Power of main engine is 39kvt.
4. Frame movable portal machine: this one-piece shank, which is a vibration device. Rack mounted on the frame, increasing the machine stability.
5. Top beam: a basic part of the casting box, which has good resistance to torsion and bending; in front of the bar is the X axis, driven by equipment consisting of servo motor, ball screw and guide the X axis, in addition to a secure seat sliding body.
6. tailstock quill: consists of a seat, the push-parts and the actual quill. The saddle is a vibration device and moves along the horizontal axis X on the beam guide; Push-piece fixed to the seat by means of a bayonet lock and moves along the vertical axis Z; quill moves along the inside rail and the push-parts is a rectangle 200x200.
7. On each axis movement is carried out: in front of the beam of X-axis, providing movement of the servomotor and ball screw; Z-axis movement is provided by ball screws with pre-tension bolts and nuts, synchronous servo drives and gear.
8. Guidance: X axis adopts linear guideways to enhance the stiffness, reduce friction, improve positioning accuracy and repeatability, long-term service of the machine and moves in a linear direction; Z-axis guides are a set of guides.
9. The tool magazine. Automatic 6-position tool magazine
10. 2 types of lubricants: greases materials and automatic lubrication of light oil.
Greases substances:. Bearing Ball Screw
The guiding axes (X, Z) is required automatic lubrication thin oil. Lubrication system consists of lubrication pump for light oil and grease fittings. Grease nipple periodically sends the selected portion of oil to each element.
11. Lubricating device: the machine is equipped with a lubricating station well-known Chinese brands.
12. Pneumatic system: pneumatic machine system performs automatic switching on and off the door (the tool magazine), all pneumatic parts of famous Chinese brands.
13. The cooling system and chip removal system: the machine is equipped unit for the coolant connected to the chip conveyor. The liquid flows from the unit and automatically contacts the head through a tube tailstock, and then re-used to protect the machine and flows back into the unit through the chip conveyor. Filter system coolant during operation and the entire system. In the direction of the X-axis table has a hinge-belt conveyor for swarf removal, width and capacity of which is comparable with the machine configuration.
14. Protection of the machine: the machine has a semi-closed system of protection.
15 . The machine is equipped with the German system CNC SIEMENS SINUMERIK 828D, headstock, feed drive axes X, Z, the main servomotor. All these elements are imported, reliable and have improved characteristics.
16. The power supply
voltage in 3φ control system, AC 380 V, the allowable fluctuation of ± 10%, frequency of 50 Hz, the permissible fluctuation ± 1HZ
pure form: the electric part is intended to accede to the execution of the network TN-CS, as well as TN-C ( 3-phase, 4-wire), TN-S (3-phase, 5-wire).
If the tolerance of ± 10% is exceeded, the voltage regulator must be installed, and the frequency (not included in the basic package, to be purchased by itself or as auxiliary equipment).
17. Protection: machine has an alarm and emergency stop button to prevent all kinds of accidents causing damage. Through the development of the software can show alarm message and alarm number on the monitor. There are three options in the event of an alarm in accordance with different situations, "emergency stop" for emergencies; "Saving the boot" for the general alarm; only the "tip" for operating mistakes.
|
Company
Last Update: Nov 18, 2016
|
|
