|
|
Vertical turning lathe KOLOMNA KU 518
Manufactured by Kolomna(Russia)
Year of manufacture 1991
Max. turning diameter, mm 3200
Faceplate diameter, mm 3200
Max. turning height, mm 2000
Max. workpiece weight, kg 50000
Number of tool slides 2
Movement of vertical supports, mm:
- Vertical 1250
- Horizontal 1720
Support movement per limb, mm:
- upper right turning 1250
- upper left compound 1250
Feeding, mm/min 0,059...470
Rapid feed, mm/min 2715
Face plate rotation speed, rpm 0,66...62,1
Main drive power, kw 70
Machine dimensions, mm 5100 x 9300 x 7200
machine height above floor level, mm 6080
Machine weight, kg 95400
Heavy duty vertical lathe is in very nice and accurate condition. Machine-tool is fully complete and under power. Slides are clean, there are no cracks on the frame.
|
27.02.2017
|
|
|
Industrial robot COMAU Smart NH3-210-3.1-SH
Manufactured by Comau (Italy)
Year of manufacture 2008
Control: C4G
Axes: 6
Load at wrist, kg 210
Additional load on forearm, kg 50
Max. horizontal reach, mm 3150
Axis 1 motion, degrees ±180°
Axis 1 speed, °/s 85 (3.14 rad/s)
Axis 2 motion, degrees +160° - 30°
Axis 2 speed, °/s 75 (2.79 rad/s)
Axis 3 motion, degrees +110° - 170°
Axis 3 speed, °/s 90 (1.92 rad/s)
Axis 4 motion, degrees ±2700°
Axis 4 speed, °/s 150 (47.12 rad/s)
Axis 5 motion, degrees ±125°
Axis 5 speed, °/s 130 (2.18 rad/s)
Axis 6 motion, degrees ±2700°
Axis 6 speed, °/s 200 (47.12 rad/s)
Repeatability, mm ±0,15
Robot weight, kg 2250
Tool coupling flange: ISO 9409-1-A160
Motors: AC brushless
Position measurement system: with encoder
Balancing: Axis 2 - spring
Total power, kVA/A 12/18,5
Industrial robot COMAU Smart NH3-210-3.1-SH has 6 working axes. It is equipped with automatic spot welding device and 3 work tables.
It has capacity of 210 kg, so could be perfectly used and for loading unloading operations.
|
27.02.2017
|
|
|
Hydraulic drawing press LITOSTROJ HVC-2-250
Manufactured by Litostroj (Slovenia)
Year of manufacture 1987
Capacity, ton 250
Cushion capacity, ton 100
Ram stroke, mm 800
Cushion stroke, mm 320
Shut-height height, mm 1250
Table size, mm 1250 x 1000
Cushion size, mm 800 x 800
Ram size, mm 1000 x 1000
Ram downward speed, mm/s 250
Ram speed, mm/s 50...8
Ram upward speed, mm/s 250
Bed speed (mm/sec)50
Ram adjusting speed, mm/s 10...1
Installed capacity, kW 60 (2 x 22 + 5.5 + 7.5 + 0,12 + 0,25)
Voltage and frequency of power current, V/Hz 3 x 380/220, 50
Power fluid capacity, l 1000
Press dimensions, mm 1600 x 3200 x 4800
Press weight, kg 25000
The press has not been in use. It is fully complete.
|
27.02.2017
|
|
|
Heavy screw-cutting lathe KRAMATORSK 1A665
Manufactured by Kramatorsk plant (Russia)
Year of manufacture 1964/2016
Max. work piece diameter, mm 1900
Center height, mm 1000
Min. work piece diameter, mm 320
Max. work piece diameter above support, mm 1250
Faceplate diameter, mm 1600
Max. work piece length, mm 8000
Max. work piece weight, kg 40000
Threading:
-metric: 1...96
-inch: 20...3/8
Spindle speed range, rpm 1,26...160
Spindle torque (6,3 rpm), kgm 7500
Rapid support movement, m/min 2
Rapid movement of tailstock, m/min 3,9
Quill diameter, mm 360
Quill movement, mm 360
Main motor power, kW 75
Required power, kW 110
Machine dimensions, mm 14520 x 2965 x 2330
Machine weight, kg 60000
The lathe in in excellent condition. It's mechanical part is completely overhauled. In case of interest, electrical part could be installed too.
Center is lifted by 150 mm, so this machine can process work piece of 1900 mm.
This lathe is equipped with one support and lunette.
|
27.02.2017
|
