|
|
LINEAR FRICTION WELDING MACHINE (LFW)
Extreme accuracy and repeatability
High frequency dynamic CNC control system
Robust and safe clamping system
High productivity through fully automatized robotic production cell
Parts : Bladed disk (Blisk), Integrally Bladed Rotor (IBR), Integrally Bladed Fan (IBF) for jet engines, thick joints, aircraft structural parts...
|
23.11.2016
|
|
|
HOT FORMING PRESS (FCC)
4 independently controlled axes
Metallic or ceramic platens can be sized up to 122 inches x 83 inches
Hot box with temperature homogeneity at 1500°F
High accuracy and repeatability of ram position
Easy integration of automated die and part handling system
CAM (Computer Aided Manufacturing) Tool design/manufacture and on-site set-up
Machine tonnage range is from 60T to 600T
Typical parts produced on this type of machine are Titanium and Aluminum parts, pylon parts, nacelle parts, engine parts, blades.
|
23.11.2016
|
|
|
ELASTOMER MATRIX FORMING PRESS (EMC)
High productivity multi reference forming
Quick and easy tool change
Equipped with standard elastomer pads
Low cost and easy/quick maintenance
Easy integration of automated tool handling system
High number of machine installed worldwide
Machine range : from 200bar to 1000bar (pressure) - from 2100T to 15000T
Parts : Supports, gussets, frames, leading edge reinforcing pieces
|
23.11.2016
|
|
|
SWING ARM PROFILE STRETCH FORMING PRESS (FEV)
Independently controlled 4 to 8 axis swing arm
Direct acting or taper locked jaws
CNC control with force and position mode
Simulation software package for part program definition and spring back compensated tool design
Automated quick tool and jaw changing system
Machine range : from 10T to 300T
Parts : Allows the forming of large parts: fuselage frames, stringers
|
23.11.2016
|
|
|
LONGITUDINAL STRETCH FORMING PRESS (FEL)
8 independent servo controlled axis well adapted to complex shapes
Compact machine, safe operations, accuracy for repeatable production
CNC control equipped with simulation software
Easy integration of automated tool handling system
High number of machine installed
Machine range : from 2x350 to 2x1000
Parts : fuselage parts with counter-forming, leading edge…
|
23.11.2016
|
|
|
TRANSVERSAL STRETCH FORMING PRESS (FET)
8 independent servo controlled axis well adapted to complex shapes
Compact machine, safe operations, accuracy for repeatable production
CNC control equipped with simulation software
Easy integration of automated tool handling system
High number of machine installed
Machine range : from 200T to 2500T
Parts : fuselage parts with counter-forming, leading edge…
|
23.11.2016
|
