MP.00 is intended for the swing drive of mobile cranes. 

Hydraulic motors are intended for operation in open and close loops of stationary and mobile installations. Hydraulic motors convert the working fluid energy into the shaft rotation mechanical energy.

Design:
- consists of reduction gear with 2 - 6 fixed or variable displacement hydraulic pumps mounted on it

Special features:
- torsional and splined drive shaft with inner and outer splines
- various versions of reduction gear housing

Tandem pump is intended for operation in close loop hydraulic systems. Intended for application in hydraulic schemes of: 
- rollers, vibratory compactors
- track-type vehicles: earthmovers, rovers, paddy harvesters
- wheeled vehicles: front loaders

The pumps transform the shaft rotation mechanical energy into the working fluid energy.
Hydraulic pump feed is proportional to the shaft rotation frequency and working displacement. Working displacement value is steplessly regulated from zero up to max value to each side. Fluid feed direction can be reversed by means of swash plate swivel change into the opposite side from the neutral position.
416 series pumps are intended for operation in stationary and mobile installations in set with hydrostatic transmissions (HST).

The pumps transform the shaft rotation mechanical energy into the working fluid flow hydraulic energy.
The pumps are intended for operation in open and close loops of stationary and mobile installations.

Hydraulic pumps convert the shaft rotation mechanical energy into the working fluid flow hydraulic energy.
Hydraulic pumps are intended for operation in open circuit stationary and mobile installations.

Working displacement: 12, 28, 56, 80, 112, 160, 250 ccm/rev