|
|
Robot cell with 2 robots on a gantry
Data: 01/06/2011
Customer: Imesa SpA
Application Area: Industrial laundry equipment
Where: I-Cessalto (TV)
Description:
Robot cell with 2 robots installed on a gantry. The first robot is equipped with a laser scanning system for an automatical recognition of the loose part in the box. The robot cell is equipped with an automatic tool and gripper changing system.
|
31.08.2016
|
|
|
Bending cell with 2 robots
Data: 01/09/2010
Customer: Smeg SpA
Application Area: Electrical house appliances
Where: I-Guastalla (RE)
Description:
Robot bending cell with 2 robots. The first one loads the metal sheet, feeds the shear and unloads/pallettizes the bent parts. The second robot in front of the pressbrake (Salvagnini) is dedicated to the bending cycle.
|
31.08.2016
|
|
|
Laser loading with robot for descharging the cut parts
Data: 01/01/2010
Customer: Smeg SpA
Application Area: Electrical house appliances
Where: I-Guastalla (RE)
Description:
The robot cella allows to descharge each single cut part from the laser table thanks to the use of robot Fanuc M-710iC 50 installed on a gantry. The robot is equipped with a laser system to recognise the cut sheet and takes automatically the right gripper to descharge the parts.
|
31.08.2016
|
|
|
Robot cell for unloading and sorting of laser cut parts and bending
Data: 01/01/2009
Customer: Cadel SRL
Application Area: Pellet stoves
Where: I-S. Lucia di Piave (TV)
Description:
Robot cell for unloading the laser, sorting the cut parts and bending these parts with one and the same robot installed on a railway. As you can see in the video, the robot is equipped with an automatic gripepr changing system, in order to operate fully automatically.
|
31.08.2016
|
|
|
Gantry with pressbrake Schiavi
Data: 01/01/2006
Customer: Ros SRL
Application Area: Subcontractors
Where: I-Azzano X (PN)
Description:
Robot cell on gantry with pressbrake Schiavi.
|
31.08.2016
|
