JK810 All In One Hydraulic DTH Drilling Rig
With less price and more equipment, JK810, the most cost-effective representation product of JK Drilling and Atlas Copco as the solution to the integration of drilling rig and air compressor, is set to revolutionize your imagination.
JK810 is an All-In-One hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. The FOPS-approved cabin and automatic pipe handling system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining. 
https://www.jkdrilling.com/all-in-one-hydraulic-dth-drilling-rig/jk810-all-in-one-hydraulic-dth-drilling-rig.html
General	Weight	kg	14300
	Length	mm	9920 (transport)
	Width	mm	2400
	Height	mm	3300
Undercarriage	Track width	mm	350
	Ground clearance	mm	≥400
	Track oscillation	°	±10°
	Walking speed	km/h	2 (low) / 3 (high)
	Grade ability	°	20°
Engine	Model	QSL8.9-C360-30
	Type	Water-cooled six-cylinder EFI diesel engine
	Rated power	kw/rpm	264/2100
	Fuel tank capacity	L	450-500
Air compressor	Model	Atlas Copco two-stage rotary screw air compressor
	Working pressure	bar	20
	Max. FAD	m3/min	18.5
Rotary motor	Rotation rate	rpm	0-85
	Max.rotation torque	Nm	3300
	Feeding method	Hydraulic motor + Chain
	Feeding force	kN	12
	Lifting force	kN	18
Feed	Feeding stroke	mm	4840
	Feed extension	mm	1100
Drill pipe changer	Drilling diameter	mm	Φ90 - Φ150
	Drilling depth	m	28
	Pipe diameter	mm	Φ76
	Pipe length	m	4
	Pipe capacity	piece	6+1
	Hammer specs		4" - 5"
Dust collector	Collecting method	Hydraulic dust collecting

As the outcome of JK Drilling-Atlas Copco alliance applying expertise from both sides, the outstanding All-In-One drilling rig-JK650 can offer you a totally different drilling feeling.
All In One DTH Automatic Drilling Rig Machine Introduction:
JK650 is an All-In-One DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. JK650 is the integration of drilling rig and air compressor, the design has many advantages like facilitating air compressor transport and management on mining site, retaining more air energy and requiring less manpower. The equipped high-performance hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining. 

The high-output Atlas Copco air compressor delivers pressure of 17bar and FAD of 17m³/min. Powerful and reliable, it suits rock formations of various hardness and offers high penetration rate with ease.
https://www.jkdrilling.com/all-in-one-hydraulic-dth-drilling-rig/jk650-all-in-one-dth-drilling-rig.html
All In One DTH Automatic Drilling Rig Machine Parameters:
General	Weight	kg	10000
	Length	mm	7863
	Width	mm	2400
	Height	mm	3080
Undercarriage	Track width	mm	300
	Ground clearance	mm	370
	Track oscillation	°	±10°
	Walking speed	km/h	2 (low) / 3 (high)
	Grade ability	°	27°
Engine	Model	QSC8.3-C260-30
	Type	Water-cooled six-cylinder EFI diesel engine
	Rated power	kw/rpm	194/2100
	Fuel tank capacity	L	400
Air compressor	Model	Atlas Copco
	Working pressure	bar	17 (high)
	Max. FAD	m3/min	17
Rotary motor	Rotation rate	rpm	0-70
	Max. rotation torque	Nm	2904
	Feeding method	Motor-driven planetary gearbox + Chain
	Feeding force	kN	12
	Lifting force	kN	18
	Feeding stroke	mm	4148
	Feed extension	mm	1200
Drilling depth & diameter	Drilling diameter	mm	Φ90-Φ150
	Drilling depth	m	50
	Pipe length	m	3
	Pipe diameter	mm	76
Dust collector	Collecting method	Dry tpye hydraulic dust collecting (Optional wet type)
Cheap Drilling Rig Machine For Sale, we guarantee product quality and delivery time!

JK730 Automatic Crawler Mounted DTH Drilling Rig features its lower operation cost and humanized design. 

It adopts a powerful diese engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, feeding, lifting, walking and angle positioning. 

During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK730 consumes about 40% to 50% less energy (fuel or electricity), and the air displacement of matched air compressor decreases 30% to 50%.
DTH Drilling Rig introduction:

JK730 DTH drilling machine is the air-compressor separated hydraulic DTH drilling rig. It is equipped with automatic pipe changer for pipestorage, changing and connecting automatically, as well as hole locating devise and luxurious cabin. Safe and comfortable operation environment substantially reduces labor intensity and curtails labor numbers. In contrast to the all-in-one rigs，JK730 is featured by its convenient operation and maintenance as well as low downtime rate.
https://www.jkdrilling.com/crawler-mounted-hydraulic-dth-drilling-rig/
Automatic Crawler DTH Drilling Rig Parameters:

Model	JK730
Borehole diameter	90-165mm
Rod carousel	Rod capacity	5+1/6+1
	Rod length	3m
	Rod diameter	φ76mm
Auto rod-changing depth	18m/21m
Applicable rock hardness	f=6-20
Working air pressure	1.2-2.4MPa
Air consumption	11-21m³/min
Feeding stroke	3850mm
Rod-changing length	3m
Max. horizontal drilling height	2970mm
Rotation rate	0-90rpm
Rotation torque	3300Nm
Travel speed	2Km/h, 3Km/h
Grade ability	20°
Power	Yuchai 92kW (optional Cummins 97kW)
Dust collector (optional)	Hydraulic dry dust collector
	Wet dust collector
Dimension (LxWxH)	7000mm×2400mm×3350mm
Weight	9000kg
As a professional DTH Drilling Rig supplier, we have professional products and perfect service.