Specifications:

Column diameter	12”
Arm length	50”
Drilling capacity in cast iron	2”
Drilling capacity in mild steel	1-9/16
Working surface of base	25-1/2” x 48”
Height of base	7”
Vertical	12”
Quill diameter	3”
Morse taper in spindle	#5
Feed speeds (6)	.003”, .005”, .009”, .013”, .023”, .039” per rev
Spindle speeds (12)	29-1,700 rpm
Drive motor	5 HP
Dimensions	81” x 42” x 94”
Weight of machine (less motor)	5,500 lbs.
  Equipped with:

Hydraulic power locking
24” x 31” 2-sided box table w/ t-slots
T-slots in base
Power elevation
Work light
Coolant
Forward/reversing switch.

Specifications:

Column diameter	12”
Arm length	50”
Drilling capacity in cast iron	2”
Drilling capacity in mild steel	1-9/16
Working surface of base	25-1/2” – 48”
Height of base	7”
Vertical travel of spindle in head	12”
Quill diameter	3”
Morse taper in spindle	#5
Feed speeds (6)	.003”, .005”, .009”, .013”, .023”, .039” per rev
Spindle speeds (12)	29-1,700 rpm
Drive motor	5 HP
Dimensions	81” x 42” x 94”
Weight of machine (less motor)	5,500 lbs.
  Equipped with:

Hydraulic power locking
34-1/2” x 31” 2-sided box table with t-slots
T-slots in base
Power elevation
Work light
Coolant
Forward/reversing switch.

Specifications:

Max. cutting cap. 90º, round	42.5”
Max. cutting cap. 90º, rectangular	42.5” x 82.7”
Blade dimensions	45’ 7 1/4” x 3-1/8” x .063”
Blade guides	Carbide
Guide arm (Manual / Powered)	Powered
Number of speeds	Infinitely variable
Blade motor	 12.3 HP
Blade tension type	 Powered
Coolant type	 Flood
Maximum Table load	65,000 lbs
Vise type (Manual/Hydraulic/Air)	Hydraulic
Voltage	220/440
Approximate weight	38,000 lbs
Equipped with:

Large dual column-parallel downfeed design
Solid cast frame
Cast Meehanite band wheels
Powered chip auger
Powered blade brush
Blade speed digital readout
Variable feed rate & cutting pressure
Conveyors

53” x 82-1/2” wide powered infeed roller conveyor built into saw bed
54” x 82-1/2” wide powered outfeed roller conveyor built into saw bed
84” x 83” wide powered auxiliary roller conveyor compete with hydraulic lifting/squaring arms
All powered roller conveyors are synced together and can be run in fast, slow and reverse modes.

Specifications:

Maximum Capacity:
1/4” x 120”
Minimum material length:	28"
Minimum diameter (up to 40" length):
6”
Minimum diameter (over 40" length):	8”
Maximum diameter:	30”
Equipped with:

Miller Maxstar 350 Power Source
Edge Sheet Aligner
(2) Miller Coolmate 4 Chillers
Cold Wire Feeder with Digital Readout
Carriage Travel Control with Digital Readout
Cyclomatic Arc Voltage Control with Digital Readout.

Specifications:

Tonnage:	250 Tons
Overall length of bed/ram:	12'
Distance between housings:	124"
Ram depth stop style:	Through control
Upacting or downacting:	Downacting
Ram tilt adjustment:	Powered
Number of backgauge axis:	3
Manual or powered Z axis:	Manual
Number of backgauge fingers:	2
Stroke length:	8”
Throat depth:	10”
Clamp style (American or European):	American
Ram clamps (sectionalized or solid bar):	Sectionalized
Hydraulic or manual clamping:	Manual
Die space (open height):	16”
Die space (closed height):	8”
Number of cylinders:	2
Stroke per minute:	11
Advance speed:	60 IPM
Pressing speed:	19 IPM
Return speed:	140 IPM
Die holder type:	4 Way
Bed height:	34”
Bed cap width:	5-1/2”
Main motor:	20 HP
Voltage:	220/440
Dimensions:	168” x 60” x 96”
Weight:	29,000 lbs.
Equipped with:

ETS3000 3-Axis CNC control with premium gauge and powered R axis
4-Way holder with 1”, 1-½”, 2” and 3” openings
2 punches
4-way die holder
3 front swing away support arms
Separate ETS100 pedestal control
Drilled & tapped holes in bed.

Specifications:

Tonnage

150

Stroke length	10”
Shut height	24-1/2”
Strokes per minute	40
Ram adjustment	4”
Bed size	33” x 50”
Ram size	24” x 34”
Dimensions	106” x 82” x 170”
Equipped with:

Air clutch
Air brake
Link logic brake monitor
4-1/2" slotted bolster.

Specifications:

Angle Shear at 90 deg.:	5” x 5” x 1/2”
Angle Shear at 45 deg.:	3” x 3” x 5/16”
Number of Built-In Work Stations:	5
Punching:	1-1/2” through 9/16”
Punch Tonnage:	88 tons
Working Height:	43”
Punch Stroke Length:	2-3/4”
Strokes per Minute:	25 SPM @ 3/4"
Throat Depth:	12”
Plate Shear:	18” x 5/8” or 12” x 3/4"
Length of Plate Shear Blades:	18-11/16”
Round Bar:	1-3/4”
Square Bar:	1-3/4”
Coper:	3-1/2” x 2” x 15/32”
Channel Shear:	5” (not included)
Hold Down Type:	Manual
Motor:	8.5 HP
Voltage:	
220/440; Currently 440 volt

Dimensions:	83” x 47” x 81”
Weight:	4,190 lbs.
Equipped With:

Dual operator with 2 foot pedals
Stroke counter
Quick change punch
Punch gauging table
Support table for coper notcher
Multiple openings for round and square bar
Structural die block.

Equipped with:

Bar Loader Magazines
Chip Conveyors.

Specifications:

Capacity:	10 gauge
Maximum cutting length:	10’
Strokes per minute:	30 full , 55 short
Number of hold downs:	16
Hold down force:	16 tons
Blade size:	1” x 3” x 124”
Backgauge range:	36” with swing up
Main motor:	10 HP
Electrics:	220/440 volt
Currently wired:	220 volt
Table height:	32”
Approximate dimensions without gauges:	146” x 84” x 80”
Approximate weight:	14,000 lbs.
Equipped with:

Stacker/Conveyor with pneumatic sheet supports and trim cut separator
Backgauge control with LED readout, inch/metric conversion, go to position, 99 pre select programs, hour meter & stroke control
36” Front operated programmed backgauge with automatic swing up
4 edged blades
Shadow line
8’ squaring arm with scale
Scrap bin
(2) hand clearance pockets
(2) 48” support arms with disappearing stops & scales
Drilled & tapped holes in front of table.

Used Press Brake Tooling Sizes Range from 144" to 36".

Specifications:

Travels: 60" x 120"
Thickness capacity: Maximum 5/8" mild steel
Equipped with:

Hypertherm Powermax 1250, 80 amp plasma power source
Downdraft table
Auto torch height control
Portable pendant.