Press brake Trumpf TrumaBend V 85

Technical Data« back to overview
item number	AP-036
Year built	1994
operating hours	13551
Manufacturer	Trumpf
Type	TrumaBend V 85
CNC Control	CNC Delem DA 24, 4-Axis Y1-Y2-X-R (+ manual Z1-Z2)
Capacity [t]:	85
Bending length [mm]:	2050
Usable installation height [mm]:	385
Width between columns [mm]:	1750
Speeds rapid [mm/s]:	200
Return traverse speed [mm/s]:	135
Speeds working [mm/s]:	1-10
Operating height [mm]:	1095
Stroke [mm]:	215
Electric connection:	10,7 kVA / 400W (± 10%) / 50Hz (± 1%) / 3 Phase / 16,2 A
Compressed air consumption:	6 ± 1 bar, 0,1 m3/h
L/W/H [mm]	2680/1950/2375
Weight [kg]	8320
-Backgauge system CNC 2-axis (XxR) + manual Z1xZ2
-Stop finger displaced - 4 pieces
-I axis Lower tool displacement 2 positions pneumatic
-Upper tool clamping hydraulic
-Under tool clamping manual
-Support seat slid sideways - 2 pieces
-Workspace lighting
-Two-hand with emergency stop button and foot switch
-Foot switch
delivery time:	ready to send
Location:	Switzerland

2D Water jet cutting machine Bystronic ByJet 3015 (3000x1500)

Technical Data« back to overview
item number	WA-002
Year built	2004
operating hours	14900
Manufacturer	Bystronic
Type	ByJet 3015
CNC Control	Procom
Working area XxYxZ [mm]	3000x1500x250
Pump	Boehler BHDT Ecotron 3800 bar
Cutting heads [piece]:	2
drilling unit	18000U/min
Max. Material Thickness St/ VA/ Al [mm]:	200
Speeds working [m/min.]:	50
Max. Positioning Speed XxY [m/min.]:	60
L/W/H [mm]	7100/6600/2600
Weight [kg]	6700
Bevel reduction
Abrasive Systeme
Abrasiv-mud and setting off system
Lifting device
automatic abrasiv feeder
High pressure pump
height sensor
Electric connection HD-Pump	64 kW / 400W (-+ 10%)/ 50Hz / 3 Phase
drilling-unit
Warranty	1 monat
delivery time:	08.2015
Location	Russia

Laser Cutting Trumpf TruLaser 3030 - 3200W (3000x1500x115)

Technical Data« back to overview
item number	LA-071
Year built	2008
operating hours	37548/20199 08.2016
Manufacturer:	Trumpf
Type:	TruLaser 3030 - 3200W
CNC Control:	Siemens Sinumerik 840 D
Working area XxYxZ [mm]:	3000x1500x115
Laser-Type:	CO2 TruFlow 3200 turbo
Laser Output [Watt]:	110-3200
Max. Workpiece Weight [kg]:	710
Max. Material Thickness (mild steel) [mm]:	20
Max. Material Thickness (stainless steel) [mm]:	12
Max. Material Thickness (aluminum) [mm]:	8
Max. Positioning Speed [m/min.]:	achsparallel / simultan (Х и Y): 60/84
consumption values ​​laser gas:	CO2 - 1,0 l/h; N2 - 6,0 l/h; He - 13,0 l/h
Compressed air consumption:	7-14 bar, 42 m3 /h, 700 l/min
Electric connection:	26-53 kW / 73 kVA / 400W ± 10% / 50Hz ± 1% / 3 Phase / 125 A
Required space length / width / height [mm]:	9300/4600/2000
Weight [kg]:	11500
Standard equipment:	
-Closed machine frame with integrated laser unit,
 -Motion unit for high precision processing,
 -Drives with maintenance-free servo motors,
 -Enclosed beam delivery system, 
-Mirror telescope,
 -Chiller,
 -Automatic pallet changer,
 -Conveyor belt for small parts / slug,
 -TFT colour screen,
 -Work area lighting,
-Positioning laser diode,
 -Spray device,
 -Machine up to 43 o ambient temperature,
-FocusLine: The FocusLine control mechanism automatically adapts the position of the laser focus to the type and thickness of the material.

-NitroLine: NitroLine enables you to use nitrogen at high pressure to cut through thick aluminum and stainless steel at high speeds.
-PlasmaLine: PlasmaLine monitors process safety when cutting thick stainless steel.
-Workshop programming:
TRUMPF Laser:	-CO2 laser TruFlow, -Maintenance-free radial turbine blower, -Radio-frequency excitation, -Laser control TASC 3, -Laser power control, -Logbook function laser
Cutting head:	-Laser cutting head with 5 zoll lens
-Laser cutting head with 7,5 Zoll lens
-Cutting head quick-change device
-ControlLine®: height regulation and process control
Control
:	

-Technology data integrated:
-Automatic shut-down device:
-Programmable cutting gas pressure:
-SprintLine®
-ContourLine®: Pulsed cutting allows you to manufacture highly accurate holes with diameters that are considerably smaller than the material thickness.
-Microweld: Welding points fixate work pieces independent of the metal thickness in the sheet.
-Teleservice:
-Diagnostic functions:
-Online-Help:

-Integrated e-shop:
Data transmission
:	-3,5 disk drive
-RJ45 network connection

Safety
:	-CE label:
-Safety devices:
-Monitoring system
-Multi chamber exhaust system
-Compact dust extractor
-Machine enclosure with Macrolon panels
Extended equipment:	
-PierceLine: This controlled and monitored piercing operation shortens the piercing cycle,
-Clamps 2 pieces
Delivery time:	09.2016
Location:	Southern Germany

Plasma Cutting Machine ESAB (1600x4000)

Technical Data« back to overview
item number	PA-001
Year built	2005
operating hours	1500
Manufacturer	ESAB
Type	SUPRAREX SXE-P1 3000
CNC Control	CNC Vision PC,
CAD / CAM system for ESAB Columbus office PCs and data transfer to the machine
Working area XxY [mm]:	1600x4000
Max. Material Thickness Steel Plasma [mm]:	20-25
Max. Material Thickness Steel autogen Brennern [mm]:	250-300
Plasma power source:	1 x ESAB Recision Plasma
Compressed air connection:	4 bar
Electric connection:	400 V (± 10%)/ 50Hz / 3 Phase / 50 A
Length [mm]:	4100
Width [mm]:	2100
Height [mm]:	2200
Weight [kg]:	7000
1 x Praezision-Plasma-Einheit bis 20-25 mm
2 x Autogenbrenner-Einheit propane / oxygen,
Cutting table:	Cutting table TEKA 2000х4000mm,
Flame cutting table extraction system with sub-table and internal suction channel
Grating for TEKA gas cutting table 2000x4000mm
Table height 700mm
Filter unit:	Filtercube 4H, 7,5 kW,(easy clean+) 100m2 (4x25m2)
Filter unit with fan capacity 7,500 m³ / h, pressure 3000 Pa,
Electric connection: 7,5 kW/ 400 V (± 10%)/ 50Hz / 15,5 A
Filter Module Dimensions: (LxWxH) mm: 800x800x2920
TEKA Spark trap BFA 5000
Delivery time:	Immediately after the agreement
Location:	Germany

Shear Amada GPN 425

Technical Data« back to overview
item number	TS-004
Year built	1997
operating hours	---
Manufacturer	Amada
Type	Amada GPN 425
CNC Control	CNC Steuerung
Max. Material Thickness St/ VA/ Al [mm]:	4/6/6
length of cut	2050 mm
cutting angle	40
backgauge	6-1000 mm CNC-gesteuerte
drive motor	15 kW
Number of sheet hold-down [mm]	13
L/W/H [mm]	3350/2250/1750
Weight [kg]	5500
cutting angle adjustment	Manuel cutting angle adjustment
blade gap adjustment	manuel blade gap adjustment

Laser Cutting Trumpf TruLaser Tube 5000 - 2400W

Technical Data« back to overview
item number	LA tubematic
Year built	2001
Manufacturer	Trumpf
Type	Tubematic 5000
CNC Control	Siemens Sinumerik 840 D
Laser-Type:	CO2 TLF 2400 turbo
Laser Output [Watt]:	2400W
Max. Workpiece Weight [kg]:	20 kg/m
Max. outer circle diameter	150 mm
Max. tube material length	6500 mm
Max. finished part length	3000 mm
Max. Material Thickness (mild steel) [mm]:	6,4
Max. Material Thickness (stainless steel) [mm]:	5
Max. Material Thickness (aluminum) [mm]:	4
Extended equipment:	
LoadMaster Tube - has your raw material ready when it's needed. Retooling times are minimal, and downtime can easily be bridged – and you can run additional shifts whenever necessary. Moreover, automation reduces the risk of operating errors, improving the quality of the workpiece. Tubes and profiles are usually delivered in bundles. You feed them into the TruLaser Tube 5000 with the help of a bundle magazin, which is part of the LoadMaster Tube loading system. After the tube length is measured, the separating device feeds the material to a gripper system that aligns the tubes and transfers them to the machine.
Weight [kg]	
Delivery time:	by appointment from 09.2016
Location	EU

Punching press Trumpf TruPunch 5000 R-1300 (2535x1280)

Technical Data« back to overview
item number	ST-018
Year built	2011
operating hours	11000
Manufacturer	Trumpf
Type	TruPunch 5000R-1300
CNC Control	Siemens Sinumerik 840 D
Working range XxY [mm]	2535x1280
Max. Material Thickness (copper) [mm]:	8
Max. Workpiece Weight [kg]:	200
Max. punching force [kN]:	220
Max. Positioning Speed [m/min.]:	100/60/116
g Speed C- Axis [rev /min.]:Max. Positionin	330
Positioning accuracy [+/-mm]:	0,1
Max. stroke rate Punching/ Marking1/min:	1400/2800
Max. number tools [зс]:	18, rotating 360 °, 3 clamps,
Electric connection:	400 V ±10%, 50 Hz ±1% , 29 kVA
Required space length / width / height [mm]:	6760/6100/2500
Weight [kg]	13700
*
Safety	- CE-marking - Multi-beam light barriers - Rapid hydraulic shutdown - Sheet collision detection
Punching Options	- Function MultiTool - Function MultiShear - Function slotting - Function MultiBend - Function tapping - Function marking/rapid beading - Function engraving - Function deburring and roll technology - Function softpunch - Adaptive stroke calibration - StripLine - Active die - Die spray lubrication
Machine Options st	- Sensor for part chute - Installation on air cushions - Chip converyor with tilt container
-brush table
delivery time:	by appointment
Location	Germany

Punch Laser Trumpf Trumatic 600L-1300

Technical Data
item number	SL-001
Year built	2000
operating hours	38378 / 20955
Manufacturer	Trumpf
Type	Trumatic 600L-1300
CNC Control	Siemens Sinumerik 840 D
Working range combined punching/Laser mode XxY [mm]	2585x1280
Working range laser operation XxY [mm]	2585x1280
Working range punching XxY [mm]	2585x1370
Laser-Type:	CO2 TLF 1800W turbo
Laser Output [Watt]:	1800 W
Consumption values ​​laser gas:	CO2 - 1,0 l/h; N2 - 6,0 l/h; He - 13,0 l/h
Max. punching force [kN]:	220
Max. Material Thickness [mm]:	8 mm
Max. Workpiece Weight [kg]:	200
Max. Positioning Speed [m/min.]:	XxYx Simultan : 90/60/108
Accuracy [+/-mm]:	0,1
Max. stroke rate Punching/ Marking1/min:	600
Max. number tools [зс]:	19, rotating 360 °, 2 clamps,
Electric connection	31-73 kW / 62 kVA / 400W (± 10%)/ 50Hz / 3 Phase / 100 A
Compressed air consumption:	65 Nm3 /h 700 l/min
Dimensions L/W/H [mm]	7500х7800х2400
Weight [kg]	16000
Delivery time:	05.2016
Location	Switzerland