STANDARD EQUIPMENTS
Wear resistant blades.
- Top blade = 4 cutting edge
- Bottom blade = 4 cutting edge

Portable foot pedal is eligible for single and automatic cutting.
CNC controlled hydraulic blade gap adjustment system.
CNC controlled cutting angle adjustment system.
CNC controller (ERCUT 7).
CNC controlled motorized backgauge system.
1000 mm motorized back gauge system with 0.1 mm accuracy.
Front support arms with T slot, ruler and flip stop.
Squaring arm.
Scales with metric and inches.
Cutting line illumination and shadow line.
Emergency stops.
Swing up backgauge.
Central lubrication system.
Front finger protection guard appropriate to CE norms, 1 m left side collapsible and switch protected.
Rear sliding plates.
Front sliding plates with ball bearings on the table.
350 mm throat depth.
Pendant controller arm.
OPTIONAL EQUIPMENTS
Pneumatic sheet support systems for thin materials.
- Lever type pneumatic sheet support system.
- Monoblock type pneumatic sheet support system.
- X type pneumatic sheet support system.

0° - 180° angle gauge.
Long and powered squaring arm with ruler.
500 mm and over throat depth.
Oil cooler.
Oil heating system.
Laser cutting line.
Sliding support arms.
Finger guard curtains.
Anti - Twist system.
Different colors.
Dynamic servo backgauge.
Sheet feeding system.
Conveyor.
Scrap separator.
Stacker systems.
X1, X2 adjustable angled backgauge system.
Blades for stainless steel cutting.
Stroke per minute – speed increase
Extended backgauge stroke
Special design – tailor made machines

STANDARD EQUIPMENTS
Hardened blades.
- Top blades : 2 sides
- Bottom blades : 4 sides

ERCUT 7 controller.
350 mm throat depth.
1000 mm motorized backgauge system with 0,1 mm accuracy.
1000 mm side gauge and front support arms.
Metric and inch rulers.
Front, side and back safety panels which are suitable for CE norms.
Sheet sliding system.
SIEMENS electrical system.
Hoerbiger hydraulic system.
Hold down cylinders.
Moveable foot pedal.
Automatic hydraulic blade gap adjustment.
Emergency stop button.
Shadow line.
Collapsible finger protection.
OPTIONAL EQUIPMENTS
Optional throat depth.
Front angle gauge.
Side gauge and front support arms in optional lengths.
Sheet conveyor and stacking system.
Front Gauge X1, X2 axis and backgauge X3, X4 axis.
Optional backgauge stroke.
Sheet support system for thin sheets.
1- Pneumatic support system. (Lever type)
2- Pneumatic support system. Monobloc panel type)

Moveable controller panel, multi functional CNC control unit.
1- CYBELEC DNC 61G

Hydraulic oil cooling and heating system.
Optional solid table.
Stainless steel blades.
Ability to increase stroke amount per minute.
Light safety system for finger protection.
Optional alternative colors.
Coolant system or heater can be placed in electric panel during ambient conditions.
Double foot pedal.
Electrical panel or controller can be placed on right side of the machine.
Laser cutting line.
Central lubrication system.

STANDARD EQUIPMENTS
Hardened blades.
Top blades : 2 sides
Bottom blades : 4 sides

ERCUT 7 controller.
1000 mm motorized backgauge system with 0,1 mm accuracy.
1000 mm side gauge and front support arms.
Metric and inch rulers.
Roller bearings on the front support arms to easy placing sheets.
Front, side and back safety panels which are suitable for CE norms.
Rear light curtains for safety.
Sheet sliding system.
SIEMENS electrical system.
Hoerbiger hydraulic system.
Automatic hydraulic blade gap adjustment.
High pressurized silent pump.
Hold down cylinders.
Moveable foot pedal.
Emergency stop button.
Shadow line.
Collapsible finger protection.
OPTIONAL EQUIPMENTS
Front angle gauge.
Side gauge and front support arms in optional lengths.
Sheet support system for thin sheets.
1- Pneumatic support system. (Lever type)
2- Pneumatic support system. (Monoblock panel type)

Hydraulic oil cooling and heating system.
Optional solid table.
Stainless steel blades.
Ability to increase stroke amount per minute.
Light safety system for finger protection.
Coolant system or heater can be placed in electric panel according to ambient conditions.
Double foot pedal.
Optional alternative colors.
Electrical panel or controller can be placed on right side of the machine.
Laser cutting line.
Possibility to produce special size and capacity models due to your manufacturing needs.
Optional alternative colors.
 

ADVANTAGES
Low invesment cost.
High efficiency.
Ergonomic design.
Energy saving.
Silent working.
Does not require large area.
Different color options.
Durable choice for your precise cutting works.
Easy installation and training.
GENERALFEATURES
High cutting quality can be achieved at high speeds,with space-saving body.
Suitable throat depth 4mm GMR for continuous strip CUTTING (standard throat depth 100mm.)
GMR 4mm; bearing between the graphite bushings,
GMR 3mm; the upper jaw running in rails between
High power transmission and torsional strength, balance shaft group.
GMR 4mm has the Easy one-hand manually adjustable GAP
Mechanically. Hold down system that prevents the sheet from slipping during cutting
GMR 3mm machines, 600mm, GMR 4mm 800mm stroke and 0.1 mm precision running back gauge system
Quiet running, easy maintenance, fast and serial motor + gearbox group. front safety plate for CE standard.
Wide arms and side miter for cutting wider plate
Electrical system proven by SIEMENS
Multi-functional, parametric adjustable, programmable controller ERCUT-7.
Sheet metal sliding group for the removal of the cut material

GENERAL ADVANTAGES
EKM series IronWorker is renewed as a result of Ermaksan engineering studies while it is designed with 3D CAD software and manufactured with accurate CNC machinery.
EKM series contain stations for punching, profile cutting, square and round bar profile cutting, flat sheet cutting and corner notching. Each work station provides accuracy and ease of use while ensuring safety with special covers.
EKM series IronWorker is contributing your business in economic powers while increasing your production efficiency with its unique cutting technology.
ADVANTAGES
Perfect solution for precise cuts.
Does not require large space.
User-friendly
Punching, flat shearing, angle shearing and notching options which does not require your best operator.
Minimum space requirement with compact design.
Durable choice for your precise cutting works.
Easy installation and training.
State of the art rigid body, that is designed with Solidworks software in 3D, satisfied in static and dynamic stiffness, produced from mono-block st44-1 quality of steel and relieved from welding tension.
Durable, hardened and grinded tools are renowned with quality and reliability and able to conduct accurate cuts.
World famous compact HOERBIGER hydraulic system, which has high credibility and is compatible with CE standards.
SIEMENS electrical system.

ERMAKSAN is a leading brand within the punching market place due to its experience and quality standards. ETP CNC Turret Punch Press quality crowned with hydraulic-free servo drive construction combines the world’s best brands in hydraulic, electronic and mechanical compounds in one machine. Specifically designed to meet customer requirements; its rigid steel structure + mono block frame allows you to punch up to 6 mm thick sheets.

We hereby present Fibermak Momentum Gen-3 with its re-newed design, dynamic lines, high productivity, perfect cut quality, ergonomic details thought for your needs and high cutting speed capacity.

GENERAL FEATURES
2.5 G high acceleration is presented optionally on servo motorized Momentum Gen-3 G Force series.
Producing time decreases and productivity increases average 15% per hour by high acceleration.
The software and automation of FIBERMAK Momentum Gen-3 are developed by solely Ermaksan’s engineers. Thus;

Your special automation solution requests can be applicable
Software upgrades can be done free of charge
Automation solutions can be added to the machine afterwards
Referring to the feedbacks from the machines, the upgrades can be applicable
After-sales support services can be given very fast via remote-access function.
High quality laser sources and/or cutting heads can be used.
Special dimension bodies can be produced.
USEABLE FUCNTIONS
Piercing control and cut-loss control can be done by LCM (laser cut monitor) sensor
Loading – Unloading and Storage systems by Tower
Modular pipe and profile cutting option
Automatic nozzle cleaning and changing

GENERAL FEATURES
Modular and ergonomic design
Designed as 0.5 G acceleration and 50 m/min. speed
Extraction Unit
Conveyor
Loading Unit
15” touch screen controller
Servo motor technology
High precision cutting head
Standard 500 W and 1 kW laser unit
CUTTING HEAD FEATURES
Manual adjustable focal lens
Precise height control
Protection Glass
Piercing air system

STANDARD EQUIPMENT
Machine frame,5 axes (X,U,Y,V with linear motor - Z axis with servo motor); High speed laser cutting machine
Chiller unit, for laser source, linear motors, cutting head and all optic components, equipped with a special micron rated water filter.
CNC control unit, Fanuc 31i-LB 10.4” LCD Screen, display screen for all laser and maintenance functions.
Cutting head, precitec HP1.5” (for 2.5 KW); HP2” (for 4 KW)
Exchangeable cartridge system, precitec 5” and 7.5”
Easy changeable lens Kit, ZnSe positive meniscus lens.
Capacitive approaching controller, sensitive distance control with precitec EG8010 adjust box.
Nozzle Kit,
Optical mirror kit, 5 pieces folding mirror.
Cutting head ceramic part kit, 3 pieces ceramic part.
Beam path system, special beam path protective bellows.
Gas and air control, two proportional valve for pressure adjustment, two sensor to control high and low pressure.
Clean - dry air system, chemical air - dryer with active carbonized filter.
Automatic loading - unloading unit.
Sheet clamps, four holder clamp on every table.
Three point reference sensor and programming.
Conveyor, part and scrap collecting conveyor.
Warning lamps.
Lantek CAD - CAM software.
Machine and operator safety system.
PCMCI flash memory card.
Manuals for all Lasermak equipments.
OPTIONAL EQUIPMENT
3.75” Cutting cartridge and 3.75” Lens (only for 1.5” cutting head) - 10” Lens with extension adaptor.
Motorized cutting head.
PS130 piercing sensor, process module, includes lens break and piercing sensors together.
Protective glasses aganist Lasermak CO2 laser beam.
Filter unit.
Lasermak spare part kit.
Ceramic part - 2 pieces
Folding mirror - 2 pieces
5” Lens - 2 pieces
7.5” Lens - 2 pieces
1.0 mm nozzle - 10 pieces
1.2 mm nozzle - 10 pieces
1.5 mm nozzle - 10 pieces
2.0 mm nozzle - 10 pieces
2.5 mm nozzle - 10 pieces
3.0 mm nozzle - 10 pieces
Flexible automation solutions.
Pipe cutting system.
Automatic nozzle cleaning and changing system.

The Advantages of TOWER Full Automatic Sheet Metal Loading and Unloading System;
7/24 working option,
No unexpected stop,
The competitive advantage for unit costs,
Precision sheet metal protection against damages and scratches,
The ideal solution for enterprises against stock area loss with multi-pallet stacking system in the tower.
TOWER has two model according to demand;
Basic Tower: Standard 2 pallets for stock area. Just one metal sheet can be stock in during the process.
Compact Tower: Minimum 3 pallets for stock area that can be customize up to 15 pallets each can payload 3000 kg. Two different types of metal sheets can be stock in different areas. Also finished metal sheet can be stock in other area.

The Fastest: 20 mm/sec
The new generation Evolution series press brake has high bending accuracy between +/- 0,01 mm
The Most Accurate: 0,01 mm
The new generation Evolution series press brake has high bending accuracy between +/- 0,01 mm.
Eco – Friendly
The new series press brakes are eco-friendly using comparably less energy than a standard pressbrake.
65% Energy Saving
An average 65% energy saving when used in comparison to standard press brakes.
Bending efficiency
Highest bending efficiency is achieved as no pressure is lost through proportional valves.

STANDARD EQUIPMENT
Mono block, welded steel frame rigid to deflection and high tensile with ST44 A1 material.
6 axes (Y1, Y2, X, R, Z1, Z2)
Back gauge system with X, R, Z1, Z2 axis driven by AC servo with colored graphics.
HOERBIGER servo hydraulic system.
CNC controlled motorized anti-deflection system.
Hardened and ground standard sectioned top and 4V-Die bottom tools (835 mm section).
Easy to clamp tool holding system with upper and lower tools.
Standard graphic controllers can be selected from: ER-90 Plus 3D colour graphical touch screen controller with offline software, Cybelec ModEva 15T 3D colour graphics with PC-ModEva offline software, Delem DA-66T 2D with colored graphics.
Electrical panel with cooling system designed to meet CE standards and composed of automation and electrical equipment with SIEMENS branding.
Ergonomic user friendly, pendant control panel.

Ara
Stronger,Faster,and Deeper Bends...
Combination of speed and power
High Free Fall Speed High Bending SpeedHigh Returning Speed
Impressive bending solutions.
POWER-BEND PRO 3 Axes CNC Press Brake
Power-Bend Series machines redesigned based on users preferences to become a unique machine with its individual electronic and mechanical features.



Product Views
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake
POWER-BEND PRO - 3 Axes CNC Press Brake

Fiber
+

+

+

 

 

STANDARD EQUIPMENT
Height adjustable and movable sliding front support arms.
Top and bottom tools are surface hardened by special treatment.
Promecam easy clamping system.
CYBELEC CYBTOUCH 12 PS 2D graphical controller with PC-ModEva 2D software.
CNC controlled strong X=800 mm back gauge
410 mm throat depth.
2 back gauge fingers
Scales in metric and inches.
Crowning system in bottom beam 3100/…/4100 - 260 - 320 manual crowning and from 400 tn and above motorized crowning is standard.
Foot pedal is produced according to CE standards and suitable for single and multiple bends.
2 photocells are placed facing each other for rear guards.
Covers for cylinders and top beam
Preadjusted electrical requirements based on customer’s geographical area.

Machined with high accuracy, dynamic and static stifness provided
Hydraulic synchronized valve technology with its repeatable bending accuracy helps you get same bending quality on different side of work piece.
Upper beam positioning is made by linear scales with 500 times in a second and with 0,0025 mm precision rate.
Single axis back gauge (X=500) system moves fast on a ballscrew shaft.
Chromed and honed hydraulic cylinders keep its precision even in high tonnages.

Don't you have enough space for a press brake?
In case, we are offering you Micro-Bend that is most productive and small size with hydraulic in its own class.
Micro-Bend, prominent with low investment cost and ergonomic design with high productivity, has the capacity to bend 5 mm mild steel with 1 m X 40 tn press force and single axis backgauge.
Advantages
Low invesment cost.
High efficiency.
Ergonomic design.
Minimum space requirement with compact desing.
DNC600S, 9,4” 2D graphic screen with high resolution.

17” 3D, LCD touch screen ER-90.
Perfect configuration for your heavy tonage bendings.
Absolute solution for deep and full-sized bendings.
Continuous precision with dynamic crowning system.
Motorized crowning system.
6 axes servo motorized backgauge system
AP3 / AP4 front sheet support system.
Long lasting, durable against heavy conditions, rigid construction
Special top and bottom tools
610 mm throat depth
Highest productivity and excellent performance is our base principle.
Single or quartet working possibility
The special press brakes designed under Ermaksan brand name are being produced at different length and capacities per our customers’ demands.
Light body guard safety system compatible with single and tandem working modes.
Lightening pole production at 14 m long quartet press brake
The daylight and stroke can be designed at any required dimensions
Special tool and clamping systems designed per customers’ needs.
We can process up to 28 m length at our high precise CNC machining centers
Precise measurings up to 1 micron can be done at 3D measuring device
Polygonal pole production. Conical pole production with special top and bottom tool.
SICK front light guard

STANDARD EQUIPMENT
Hypertherm MicroEDGE ® Pro CNC
17’’ LCD industrial type touch screen
Hypertherm operator panel
Safety module input and output
Hypernet communication system
Remote connection interface
Phoenix interface
Metric and inch gauges.
HyPerformance® MaxPro200 plasma source
Hypertherm automatic gas console
ERMAK THC automatic height control system
Safety input-output interface module
Nozzle sensor
Collision sensor
200 mm standard stroke
Laser Pointer
TurboNest® Cad/Cam software
3 Axis (X,Y,Z)
3 pieces Mitsubishi AC servo motor and driver
3 pieces planet type Neugart gear box
High accuracy linear rails
High accuracy an silent Atlanta Helis rack and pinion
X,Y, Z Axis Igus brand silent cable tray
Cutting table with pneumatic system
Moving control panel system
2 Emergency buttons
6 Mechanical stops
OPTIONAL EQUIPMENT
Oxy cutting station
Messer-tanaka oxygen torch
Ermaksan automatic ignition system
IHT Automation capacitive distance and height control
Manual angle cutting apparatus for oxygen and plasma
350mm and 500mm adjustable stroke for oxygen and plasma
Pipe cutting technology
Hypertherm EDGEPro CNC controller
Hypertherm Turbonest+Rotary Tube Pro Cad/Cam Software

STANDARD EQUIPMENTS
3 automatic repositioning clamps and loading switches.
Tool lubricating system (Airblow).
Free standing control panel.
Control with foot pedal.
1 software (Lantek or Metalix).
User manual and maintenance catalogue.
15 x A station 1/2’’ fixed 1,6-12,7 mm round
12 x B station 1-1/4’’ fixed 12,8-31,7 mm round
2 x C station 2’’ fixed 31,8-50,8 mm round
1 x D station 3-1/2’’ fixed 50,9-88,9 mm round
3 x D station 3-1/2’’ index 50,9-88,9 mm round
Digital oil temperature indicator.
Software for using wheel and forming tools.
Scrap box.
Chain protection around the machine (safety system).
Hydraulic oil cooling system.